BlueAnt S4 - Manual (Page 15)

EN
G
LI
SH
15
List of Voice Commands
When you want to do something, just say BlueAnt Speak To Me , wait for the S4 to ask you to Say A Command ,
and then say one of the following commands:
> Am I Connected? — The S4 will check if your phone is connected, and attempt to connect if it is not.
> Call Back — Calls back the last incoming call received on the S4.
> Check Battery — Tells you the battery level on the S4.
> Pair Me — Puts the S4 into pairing mode. Any connected phone will be disconnected.
> Phone Commands — Activates your phone’s voice dialing feature (if supported). Depending on your phone
model, you may need to record voice tags on the phone to use this feature.
> Redial — Redials the last outgoing call made on the connected phone.
> Sensitivity Level — Confi gures the sensitivity of the S4’s voice recognition.
> LED Light — Turns the LEDs on or off. When the LEDs are set to off, they still light up when you turn the S4 on
or off, but will not fl ash at other times.
> Update Phonebook — Updates your phonebook contacts on the S4. If you add contacts to your phone, or