BlueAnt S4 - Manual (Page 33)

EN
G
LI
SH
33
> If you take the S4 out of range of your phone, then it will play a tone to indicate that it is no longer connected.
> The S4 plays a tone when you end a call.
> The S4 plays a call waiting tone if you receive an incoming call while you are on a call.
The S4 Light is Distracting
By default the Bluetooth indicator will fl ash blue at regular intervals to indicate that the S4 is switched on. If you
prefer, you can switch this light off. You might want to turn off the light if you fi nd it distracting, for example if you
are using the S4 while driving at night.
When you turn the LEDs off, they will still light up when you turn the S4 on and off, but not at other times.
To turn the lights off or back on again, use the
LED Light command.
Resetting the S4
If you are having problems with the S4, you can reset it and start again.
Resetting the S4 will clear all the stored pairing settings on the S4, delete any stored contact details and put the
device back into pairing mode.