Bird Technologies SA-6000XT-Manual - Manual (Page 79)

63
Figure 60 Saving a Setup
Recalling a Saved Setup
Ensure that the unit is in either Measure Match mode or Fault Location mode to
recall a setup.
1.
Press the Save/Recall softkey
2. Press the Setup softkey.
3. Press the up and down scroll keys to select a setup to recall.
4. Press the Recall softkey.
Note: The selected setup parameters are recalled and replace the
current setup in the unit.
5. Press the Esc key to exit the Save and Recall screen.
Figure 61 Recalling a Saved Setup