Bird Technologies SA-6000XT-Manual - Manual (Page 81)

65
Figure 63 Text Label Configuration
Label Text Help
The Site Analyzer has a built-in help screen that describes how to use the label
text feature. To access the label text help, ensure that the unit is in either Mea-
sure Match mode or Fault Location mode.
1.
Press the Save/Recall softkey.
2. Press the Save softkey.
3. Press the Config key.
4. Press the Help softkey to open Help screen.
5. Press the Enter key to close Help screen.
6. Press the Esc key two times to exit the configure screen.
Figure 64 Text Label Help