Bird Technologies BDS-Manual - Manual (Page 25)

11
Port - The TCP/IP socket port (always 10050).
Reconnection - Mark this checkbox to have the BDS GUI automatically reconnect when it loses connection with
the receiver or if a connection fails.
Timer Interval - The time in seconds to wait before the next reconnection attempt is made.
Connect button – Establishes a connection with the receiver at the given address. Closes the dialog and saves the
settings to the system registry.
Cancel button – Exits the dialog without applying the connection.
Applying Power
The Bird Diagnostic System receiver requires an external customer supplied 24 VDC power source capable of deliver-
ing 1 amp. DC power is delivered through the Power In connector.