Table 5-57 deesegment – transmission line segment, De-embedding parameters – Bird Technologies BDS-Manual User Manual
Page 92

78
Table 5-57 DeeSegment – Transmission Line Segment
De-embedding Parameters
Note: Structure size = 20 bytes.
Table 5-58 DeeOpts - De-embedding Options Bitfield (8-
bit BYTE)
DeeSegment – Transmission Line De-embedding Parameters
Name
Data Type
Description
Byte
Loss
REAL
Line section loss in Ohms/cm.
Default: 0 (No loss)
0
Reserved
REAL
Parameter used for internal system use.
4
Length
REAL
Segment length in cm. Note: a length of 0 is
invalid.
Default: 0
8
Line Impedance
REAL
Line section impedance (Z0) in Ohms.
Default: 50
12
Phase Velocity
REAL
Velocity of propagation (in fraction of Speed of
light). A typical value is 0.7.
Default: 1
16
DeeOpts – De-embedding Options Bitfield
Bit
7
6
5
4
3
2
1
0
Field
Direction x
x
x
x
x
x
Enable
Bit
Field
Description
Bit Clear (0)
Bit Set (1)
0
Enable
Enables/Disables
de-embedding.
Disables de-embedding. Enables de-
embedding.
1
Direction
Direction of rotation.
Rotates towards load.
Rotates towards RF
source.