Bird Technologies 8251D208 - Manual (Page 29)

Storage
No special preparations for storage are necessary other than
to cover the equipment to keep out dust and dirt. Store the
unit in a dry and dust-free environment where the ambient
temperature will remain within the -40°C to +45°C (-40°F to
+113°F) working range of the load.
Customer Service
Any maintenance or service beyond the scope of those pro-
vided in this section should be referred to a qualified service
center.
Any equipment returned must be shipped prepaid and to
the attention of the Service Group.
Bird Electronic Corporation maintains a complete repair
and calibration facility at the following address:
Sales/Repair
Facility
U.S.A. Sales and Manufacturing
Service Group
Bird Electronic Corporation
30303 Aurora Road
Cleveland (Solon), Ohio 44139-2794
Phone: (440) 248-1200
Fax: (440) 248-5426
Sales
Facilities
For the sales office nearest you, call Bird Electronic Corpo-
ration at the above telephone number, or visit our Web site
at:
http://www.bird-electronic.com
Preparation
for Shipment
Should you need to return the load, use the original ship-
ping package if possible. Wrap the RF connector with pad-
ding and tape securely in place. It is not necessary to
remove the coolant to ship the load. Simply replace the vent
plug with the shipping plug attached to the bead chain. Be
sure the O-Ring seal is mounted on the plug to avoid leak-
age.
17
Maintenance