Bird Technologies 8255 - Manual (Page 29)

Storage
No special preparations for storage are necessary other
than to cover the equipment to keep out dust and dirt.
Store the unit in a dry and dust-free environment where
the ambient temperature will remain within the -40°C to
+45°C (-40°F to +113°F) working range of the load.
Customer Service
Any maintenance or service beyond the scope of those
provided in this section should be referred to a qualified
service center. Bird Electronic Corporation maintains
complete repair and calibration facilities at the following
address:
Sales/Repair
Facilities
U.S.A. Sales and Manufacturing
Service Group
Bird Electronic Corporation
30303 Aurora Road
Cleveland (Solon), Ohio 44139-2794
Phone: (440) 248-1200
Fax: (440) 248-5426
Sales
Facilities
For the location of the sales office nearest you, give us a
call or visit our Web site at:
http://www.bird-electronic.com
Preparation for Shipment
Should you need to return the load, use the original ship-
ping package if possible. Wrap the RF connector with
padding and tape securely in place. It is not necessary to
remove the coolant to ship the load. Simply replace the
vent plug with the shipping plug attached to the bead
chain. Be sure the O-Ring seal is mounted on the plug to
avoid leakage.
Maintenance
17