Blizzard Lighting V12 The Puck (REV A) - Manual (Page 15)

Page 15
The Puck™ V12 Manual Rev. A © 2013 Blizzard Lighting, LLC
EdIT
Edit Scenes & Programs
Create/edit up to 10 programs of up to 30 scenes for playback in standalone
mode, (from the “Auto” menu).
• PR01-PR10
- Program numbers 1-10
• SC01-SC30
- Scene numbers 1-30
To edit these programs and scenes:
•• R000-R255
- Red Intensity (0% <--> 100%)
•• G000-G255
- Green Intensity (0% <--> 100%)
•• B000-B255
- Blue Intensity (0% <--> 100%)
•• Y000-Y255
- Amber Intensity (0% <--> 100%)
•• W000-W255
- White Intensity (0% <--> 100%)
•• ST00-ST20
- Strobe Speed (Slow <--> Fast)
•• T000-T255
- Scene Time (0% <--> 100%)
•• F000-F255
- Fade Time (0% <--> 100%)
SET
Advanced Setup Functions
The following options sets the fixture’s advanced functions:
• UPLd
This allows you to upload you own user-created custom programs to other
The Puck™ V12 fixtures. You must set any fixtures which will receive the
new programming to SLAVE mode, then on the master unit, enter the lock
password (UP/DOWN/UP/DOWN/ENTER), then press enter to confirm.
The fixtures will display yellow while uploading is in progress, and will turn
green once uploading is complete.
• REST
Factory reset. Use this to reset the Puck Pro Zoom fixture back to its
original factory installed settings.
• Id
Enables/disables ID address operation.