Blizzard Lighting V12 The Puck (REV A) - Manual (Page 16)

Page 16
The Puck™ V12 Manual Rev. A © 2013 Blizzard Lighting, LLC
• RGBU
Enables/disables RGBW color correction.
• POU
Sets the fixture in “Normal” (Low Power, 33% output) or “High” power
mode.
• DIN
Sets the 16-bit dimming curve (OFF=8-bit (standard) dimming, 1-4 are 16-
bit dimming profiles, fastest to slowest).
CAL1
Color Temperature-Based White Values
This menu option allows the user to set the fixture’s white output to one of 11
preset or user adjustable color temperatures.
Setting Color Temp Setting Color Temp Setting Color Temp
WT01 3200K WT05 5600K WT09 8000K
WT02 3400K WT06 5900K WT10 8500K
WT03 4200K WT07 6500K WT11 10000K
WT04 4900K WT08 7200K
To adjust the RGBW settings of any of these preset color temperatures, hit
<ENTER> and then use the <UP> and <DOWN> buttons to select the
desired R/G/B/W value you want to edit. Hit <ENTER>. Use the <UP> and
<DOWN> buttons to change the desired value. Then push the <MENU>
button to confirm your choice and return to the previous menu option. Each
color has the adjustable values of 000 <--> 255 (0% <--> 100%).
CAL2
RGBW Based Values
This is used to setup a custom white balance using R/G/B/W values. Hit
<ENTER> and then use the <UP> and <DOWN> buttons to select the
desired R/G/B/W value you want to edit. Hit <ENTER>. Use the <UP> and
<DOWN> buttons to change the desired value. Then push the <MENU>
button to confirm your choice and return to the previous menu option. Each
color has the adjustable values of 000 <--> 255 (0% <--> 100%).