Operating instructions, Page 5 – Blizzard Lighting AutoBahn 8 User Manual
Page 5
Page 5
AutoBahn™ 8 User Manual - Rev. A
(c) 2014 Blizzard Lighting, LLC
Rear Side
9.) Power Input
AC power cable input
10.) Neutrik™ EtherCON® Ethernet Port
To connect the ethernet cable
11.) DMX IN A/B
DMX signal intput
12.) DMX Out (1-8)
DMX signal output
3. OpERATING INSTRuCTIONS
STARTUp vIEW:
There are 4 initial “top-tier” menu status screens (shown above) that
you’ll see when you power on the unit. You can scroll through them by
using the <Up/DOWN> buttons. The Device Name, Device ID, and
Ip Address can all be edited later within the menu settings.
In the first row of the port status screen; A/B refers to the DMX IN
A/B, and 1-8 refers to DMX outputs 1-8. In the second row of port
status screen; “x” means the port is inactive, “√” means the port is
active, and “—” means the port has been set as disabled.