Blizzard Lighting AutoBahn 8 - Manual (Page 6)

Page 6
AutoBahn™ 8 User Manual - Rev. A (c) 2014 Blizzard Lighting, LLC
RENAMING THE DEvICE:
Enter the main menu by pressing the <MENU> button, then use
the <Up/DOWN> buttons to highlight “1. Rename Device”. Press
the <ENTER> button. Then use the <Up/DOWN> buttons to scroll
through the characters, and push the <ENTER> button when the
character you’d like to change is highlighted. Use the <Up/DOWN>
buttons to scroll through your choices, and push the <ENTER> button
to confirm the change. Repeat this process for each character as
necessary to rename the device.
To finish renaming your device, you must save your changes by
using the <Up/DOWN> buttons to scroll to “Enter”, and then push
the <ENTER> button.
SETTING THE Ip ADDRESS:
Enter the main menu by pressing the <MENU> button, then use
the <Up/DOWN> buttons to highlight “2. Set Ip Address”. Press
the <ENTER> button. Then use the <Up/DOWN> buttons to scroll
through the IP address character groups. Push the <ENTER> button
when the set of characters you’d like to change is highlighted. Then
use the <Up/DOWN> buttons to scroll through your choices, and
push the <ENTER> button to confirm the change. Repeat this process
for each character group as necessary.
To finish setting the IP address, you must save your changes by
using the <Up/DOWN> buttons to scroll to “Enter”, and then push
the <ENTER> button.
*Please Note: The IP address must be unique!