Rapid flow installation – Bully Dog 182061 Dodge 5.9L Cummins 2500-3500 03-04 User Manual
Page 8

9
RAPID FLOW INSTALLATION
7
Note: At this point you will skip installing the Straight Pipe and start at the Muffler and work back toward the
rear of the vehicle.
5. Hang the Muffler from Hangers B & C. En-
sure that the leuvers are pointed toward
the front of the vehicle.
6. Install the Front Piece Tail Pipe by sliding
it into the Muffler and tightening Hanger
C to hold it in place. Ensure that the bend
of the Front Piece Tail Pipe is directly
over the axle. At this point don’t tighten
down Hanger C completely, instead wait
until the entire exhaust is installed before
tightening everything down completely.
7. Install the Tail Pipe Tip by sliding it into
the Front Piece Tail Pipe and hanging it
from Hanger D. Secure with a clamp.
Install Front Piece Tail Pipe
Install Muffler
Install Tail Pipe Tip
Tail Pipe Tip
Front Piece Tail Pipe
Hanger D
Hanger B
Hanger D
Front Piece Tail Pipe