Bully Dog 53252 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 2)

1
TROUBLESHOOTING:
Technical support is available by calling 940-783-9914.
Tech support by phone is available:
Monday-Friday 8am-5pm Mountain Standard Time.
TABLE OF CONTENTS
INTRODUCTION ..........................................................................................................PG. 1
PARTS INCLUDED ........................................................................................................PG. 2
PARTS DESCRIPTION ..............................................................................................PGS. 3-7
INSTALLATION ....................................................................................................PGS. 8-19
REMOVING THE STOCK AIR INTAKE ................................................................PGS. 8-13
PREPARING TO INSTALL THE RFI INTAKE ...................................................... PGS. 14-15
INSTALLING THE RFI ON THE VEHICLE .......................................................... PGS. 16-19
FILTER MAINTENANCE ..............................................................................................PG. 20
PREFILTERS ..............................................................................................................PG. 21
REPLACEMENT CONE FILTER .......................................................................................PG 22
Table of Contents
INTRODUCTION
This instruction set outlines the installation and maintenance of the Stage 2 Rapid Flow Cold Air Intake
for all GM 4.8L, 5.3L, 6.0L, and 6.2L gasoline powered pickups or SUVs ‘07-’08 (new body). Installa-
tion of this intake takes about 20 minutes and requires only basic tools. This installation requires little
mechanical experience and can easily be performed in a driveway by those who have never installed
an intake on a vehicle before.
For additional questions or product information visit our website www.bullydog.com or call Bully Dog
technical support.