Bully Dog 53206 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 11)

RFI COLD AIR INTAKE
11
Installing the RFI Intake
I. Mount the RFI Base in the engine bay. IMG 5560
A. Use the three stock screws that were set aside while removing the filter
housing mounting plate.
B. Use a 10 mm socket.
II. Install the Stage 2 RFI Tube assembly.
A. Slide the straight coupler over the throttle body connection.
B. Line the tube up with the MAF RFI Tube assembly as shown in the photo.
C. Slide the tube over the RFI MAF Tube.
D. Line the tubes up (as shown in photo).
E. Tighten the band clamps. (Use a flat-head screwdriver.)