Bully Dog 53206 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 14)

RFI COLD AIR INTAKE
14
Oiling the Filter
I. Apply a small amount of oil to the soft-bristle
brush and gently spread the oil over the filter.
Be sure to apply only a small amount of force
so the filter is not damaged.
II. Continue applying the oil to the filter until the
entire filter is covered in an even amount of oil.
Apply enough oil to make the filter a solid and
uniform blue, but do not go beyond that.
III. Allow the oiled filter to sit 20
minutes. Re-oil any dry spots
that appear. Do not oil the filter
excessively. Excessive oiling can
cause damage to intake sensors.
Prefilter
I. The Bully Dog RFI Prefilter
is a semi-water-repellent
barrier that will keep
bugs and debris out while
lengthening the time
between filter cleanings
and reducing the amount
of time you spend cleaning
the filter.