Bully Dog 53106 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 10)

9
RFI COLD AIR INTAKE
4. Prepare the Stage 2 RFI Tube.
• Connect the hump coupler to the MAF side.
• Connect the straight coupler to the turbo side.
• Attach the band clamps.
• Do not tighten the band clamps; leave them loose so
you can adjust the couplers into the correct position.
Installing the RFI Intake
1. Install the RFI base assembly.
a. Mount the base in the engine bay space where the
stock intake box sat.
b. Secure the base with the three machine screws set
aside on step 6 (page MARKER).
Silicone Coupler
4” Band Clamp
4” Band Clamp
Silicone Hump Coupler
5” Band Clamp
5” Band Clamp