Bully Dog 51201 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 17)

16
Optional, Post -installation Process to Increase Cold Air Flow:
Want to maximize the cold air potential of this intake to truly maximize horsepower and fuel
economy. Follow these easy steps to open up the cold air flow into the extra cool air intake
duct on the Rapid Flow lid. This will provide the full effect of our design.
waRNINg: peRFORmINg These sTeps wIll IN geNeRal leaD TO INTRODUCINg mORe DeBRIs
aND pOTeNTIally mORe mOIsTURe INTO The eNgINe Bay.
1. Locate and remove the shroud on the drivers side front of the vehicle.
2. Locate the shroud located on the inside of the engine bay just behind the drivers side
head light. Remove only the plastic rivets located on the radiator side of this shroud and
then fold the shroud back as seen in the photos below.
Post-Installation