Bully Dog 51201 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 4)

3
Parts Description:
This section describes each part and any special features of each part that need to be noted
to assist with installation. All parts will be referred to during installation by the names used
in this section.
The lid: This simple to install lid replaces the stock lid and conceals and protects the high
flow air filter that comes with the kit. It also has an extra air flow port to provide more cold
air from the front of the vehicle for a slight charge effect.
air Intake Tube with maF mount: This tube comes with a precisely manufactured mass
air flow sensor mount with inset screw mounts. The tube also has a unique interference
snap fit feature that will tightly secure the intake tube to the lid.
Air Filter side
Snap fit to Lid
MAF sensor mount
Parts Description