Bully Dog 83200 Rapid Flow - Manual (Page 8)

9
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 83010, 83200
8. Install the Muffler.
8. Install the Front Piece Tail Pipe over the rear axle.
Confirm that the bend of the Front Piece Tail Pipe is
directly over the rear axle.
9. Next install a Tail Pipe Tip into the Front Piece
Tail Pipe. Ensure that the desired location will
not come in contact with the body of the truck or
blacken the paint.
10. Tighten the Clamp by hand between the Tail Pipe
Tip and the Tail Pipe.
SwITCH DIRECTIONS: THE NEXT STEPS wILL BE FROM THE BACk OF THE TRUCk
Hanger E
Tail Pipe Tip
Front Piece Tail Pipe