Bully Dog 82201 Rapid Flow - Manual (Page 9)

10
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 82050,82201
Muffler Install
Muffler
Hanger B
8. At this point it is time to install the
Straight Pipe. You will need to measure
and cut the Straight Pipe for the final
fit. Keep in mind on both systems when
you make your final cut you will need to
leave an extra 3 inches of
overlap when you cut the
Straight Pipe. Do not cut
the flared end. Do not cut
the flared end.
9. Once the entire exhaust system
is installed, inspect the system to
ensure that no part of the exhaust
is in direct contact with the chassis
or body; adjustments may be neces-
sary.
10. Return to each of
the Clamps and tighten with a 9/16”
wrench. Do not over tighten the
Clamps.
.
Measure Straight Pipe
Muffler
3”
9/16”
System Installation Complete