Installation – Bully Dog 44633 VW TDI Rapid Power Module User Manual
Page 7
Advertising
6
5. Connect the female module plug to the rail pressure sensor male end (the end that is
fixed to the common rail). Make sure that the locking mechanism is fully secured, the lock-
ing mechanism will make a snapping sound when the plugs are completely connected.
6. Connect the remaining two plugs together: the module male plug and the stock female
pressure sensor plug. This will complete the installation of the plug set. Tuck these two con-
nected plugs next to the fuel rail pressure sensor plug at the end of the fuel rail.
Installation
Advertising