Bully Dog 44633 VW TDI Rapid Power Module - Manual (Page 8)

7
Installation
7. With the plug set connection complete move the module away from moving parts and
start the engine, the engine should run just as it normally would. If the engine does not
start check the plug connections to make certain they are secure. If the plug connections are
secure and the engine does not start or it runs rough the module will need to be updated
online through the Update Agent.
8.Secure the module and the wiring harness as far away from heat and moving parts as
possible using the velcro and zip ties that are included in the package.
9. With the module secured, run the flip switch to a location that is convenient for switching.
The switch can be secured in the engine bay or the switch can be run into the interior of the
vehicle through the fire wall. For instructions on using the switch see the next page.