Appendix – Bully Dog 40300 PMT advanced vehicle downloader, controller, monitor and gauge User Manual
Page 64
63
Intr
odu
ctio
n
Par
ts D
escription
PM
T In
sta
llati
on
Op
era
ting
Ins
tru
ctio
ns
appeNDIx:
The appendix contains important information for the PMT and is split into five sections.
•
seCTION 1:
pyROMeTeR CaLIBRaTION pROCeDURe
•
seCTION 2:
TRaNsMIssION ReLeaRN pROCeDURes: FORD aND GM
•
seCTION 3:
CUsTOM a-pILLaR paRT NUMBeR INFORMaTION
•
seCTION 4:
TROUBLesHOOTING/eRROR CODes
•
seCTION 5:
FORMaTTING sD CaRD
•
seCTION 6:
WaRRaNTy/DIsCLaIMeR
seCTION 1:
PYROMETER CALIBRATION PROCEDURE
BEFORE THIS STEP CAN BE COMPLETED, COMPLETELY INSTALL THE PMT AND ALL OF ITS COMPONENTS.
1. Vehicle must be set to Stock HP/TQ levels-meaning no HP/TQ modifications of any kind (downloader or plug-in
modules).
2. Engine must be put under full load for as long as possible on the hottest day possible. It is suggested to drive up a
hill or pull a trailer.
3. During a heavy load pull, record the highest reading.
4. Take that reading and add 150° to the high number and that will be your new defuel number that you do not
want to exceed.
APPENDIX
Inte
rne
t U
pda
tes
App
end
ix