Calculated Industries 4095-B Pocket Reference Guide - Manual (Page 11)

Trigonometric Keys

Finds the sine of a degree or
undimensioned value.
  Arcsine (sin
-1 ) – Gives the angle
degrees for the Sine value.

Finds the Cosine.
  Arccosine (cos
-1 ) – Gives the
angle in degrees for the Cosine value.
 Finds
the Tangent.
  Arctangent (tan
-1 ) – Gives the
angle in degrees for the Tangent
value.
Pipefitting Project Keys

Enters or calculates a linear Slope,
Slope Angle or Percent Grade.
  (%Grade) Used to enter or solve
Percent Grade. Calculates Percent
Grade based on entered
Offset and Run or Slope.

Enters, calculates or stores the
Offset (Rise).

Enters or calculates the Run.

Enters or calculates the Travel
(Diagonal).