Calculated Industries 4095-B Pocket Reference Guide - Manual (Page 22)

Using Memory Storage Keys (M1 - M9)
In addition to the standard cumulative memory
(as previously described), your calculator has
nine independent storage registers – M1 through
M9 – that can be used to permanently store sin-
gle, noncumulative values. The following example
shows the use of M1 (
 ). To use M2 - M9,
replace the presses of the
 key with presses of
the corresponding number key (
 - ).
You can replace a value in one of these
memory registers by storing a new value in
place of the stored value.
FUNCTION KEYSTROKES
Store single value in M1
 
Clear M1
  
Recall M1
 
Example: Store 175 into M1, recall the value,
and then clear the value.
KEYSTROKES DISPLAY
    
M-1 175.
 
0.
 
M-1 175.
  
M-1 0.
P
OCKET
R
EFERENCE
G
UIDE
— 23