Calculated Industries 4095-A User Guide User Manual
Page 12
10 — P
iPe
T
rades
P
ro
™
FRAC 0 1/2 INCH
FRAC 0 1/4 INCH
FRAC 0 1/8 INCH
(repeats options)
FRAC 0 1/16 INCH
Second press of :
(Area displays)
AREA Std.
AREA 0. SQ FEET
AREA 0. SQ INCH
AREA 0. SQ M
(repeats options)
Std.
Third press of :
(Volume displays)
VOL Std.
VOL 0. CU FEET
VOL 0. CU M
(repeats options)
VOL Std.
Fourth press of :
(Meter Linear displays)
METR 0.000 M
(floating point)
METR FLOAt M
(repeats options)
METR 0.000 M
Fifth press of :
(Decimal Degree displays)
DEG 0.00º
(floating point)
DEG FLOAt
(repeats options)
DEG 0.00º
Sixth press of :
(Fractional mode)
FRAC Std.
FRAC COnSt.
(repeats options)
FRAC Std.
Seventh press of :
(Mathematical Operation)
MATH OrdEr
MATH CHA1n
(repeats options)
MATH OrdEr
UG4095E-A.indd 10
5/5/2009 9:09:29 AM