Appendix d – Calculated Industries 4095-A User Guide User Manual
Page 40
38 — P
iPe
T
rades
P
ro
™
(Volume displays)
VOL Std.
VOL 0. CU FEET
VOL 0. CU M
(repeats options)
VOL Std.
Fourth press of :
(Meter Linear displays)
METR 0.000 M
(floating point)
METR FLOAt M
(repeats options)
METR 0.000 M
Fifth press of :
(Decimal Degree displays)
DEG 0.00º
(floating point)
DEG FLOAt
(repeats options)
DEG 0.00º
Sixth press of :
(Fractional mode)
FRAC Std.
FRAC COnSt.
(repeats options)
FRAC Std.
Seventh press of :
(Mathematical Operation)
MATH OrdEr
MATH CHA1n
(repeats options)
MATH OrdEr
aPPEndix d –
Constants
For material surface roughness, we use the following:
Material
PVC
Copper
Steel (low carbon)
Stainless Steel (austenitic)
Brass
Aluminum
Cast Iron
15.6
4.9
221
49.2
4.9
4.9
850
e (x 10
-6
ft)
Roughness Factor
UG4095E-A.indd 38
5/5/2009 9:09:35 AM