Calculated Industries 4095-A User Guide - Manual (Page 25)

U
ser
’
s
G
Uide
— 23
Concentric Pipe Bend Cutback
Find the pipe Cutback when you are running pipes through a
45º bend with a 10" offset.
10”
CUTBACK
45º
KEYSTROKES DISPLAY

 0.
1. Enter the bend angle:

  /Ø 45.00
2. Enter the Offset:

   OFST 10 INCH
3. Calculate the Cutback:

 CUT 4 1/8 INCH
Rolling Offset
The components of rolling offset calculations sometimes have
different names in different geographic regions and in different
trades.
● Roll – the horizontal component of a rolling offset. May also
be known as “offset”.
● Offset – the vertical component of a rolling offset. May also
UG4095E-A.indd 23 5/5/2009 9:09:33 AM