Calculated Industries 8525 Pocket Reference Guide - Manual (Page 11)

P OCKET R EFERENCE G UIDE - 9
Ç 3 - Block
Calculates the number of standard
128-Square Inch blocks (with 1/2”
mortar), based on an entered linear
distance or area and a stored Block
Area (see below).
s 3 - Stores Block Area
Stores Block Area in Square Inches.
To recall this setting, press
r 3.
Default is 128 Square Inches
(includes 1/2” mortar).
Note: When calculating the number of blocks for
an entered length, calculator uses a 16-Inch block
length, as the majority of blocks are 16” long.
Ç 0 - Gravel
Calculates tons of gravel required, based
on an entered volume and a stored
Weight per Volume (see below).
s 0 - Stores Gravel Weight per
Volume
Stores the number of Tons per Cubic
Yard of gravel. To recall this setting,
press
r 0. Default is 1.5 tons per
Cubic Yard.
Ç • - Cost
“Cost” function that allows you to cal-
culate total material cost.