Calculated Industries 8525 Pocket Reference Guide User Manual

Page 8

Advertising
background image

d - Deck

Finds the number of boards for a deck,
based on an entered area and a stored
Board Width or Board On-Center
(see below). Repeated presses will
scroll between numbers of boards for
various “standard” board lengths
(12’, 10’, 8’, 20’, 18’, 16’ and 14’).

s d - Stores Board Width/O.C.

Stores Board Width or Board On-center
for deck or fence calculations. To recall
this setting, press

r d. Also used

to store the board On-center for Fence
Spacing. Default is 5-11/16 Inches.

F - Fence

Multi-function key that finds the
number of fence boards, number of
posts and number of rails based on
an entered distance, Board
Width/O.C.
and post spacing.

s F - Stores Post Spacing

Stores Post Spacing On-center for
fence in Feet-Inches. To recall this set-
ting, press

r F. Default is 8 Feet.

Ç 7 - Board Feet

Calculates number of board Feet
based on entered volume. One board
foot equals 144 Cubic Inches.

P

OCKET

R

EFERENCE

G

UIDE

- 6

Advertising