Calculated Industries 8525 Pocket Reference Guide - Manual (Page 4)

P OCKET R EFERENCE G UIDE - 2
i - Inch Key
Enters or converts to Inches. Entry
can be whole or decimal number.
Also used with the
/ key for entering
Fractional Inch values (e.g., 9 i
1 / 2 ). Repeated presses during
conversions toggle between
Fractional and Decimal Inches.
/ - Fraction Bar Key
Used to enter fractions. Fractions
can be entered as proper (1/2, 1/8,
1/16) or improper (3/2, 9/8).
m - Meter Key
Enters or converts to Meters.
Convert Key Functions
Ç - Convert Key
Used with the dimensional unit keys
to convert between dimensions, the
Project Keys to calculate material
quantities, or with other keys to
access special functions.
Ç x - Clear All
Clears all stored values and sets cal-
culator back to defaults.
Ç / - Percent (%)
Four-function (+, -, x, ÷) percent.