Clay Paky HandsOn - Manual (Page 11)

Handson Manual
Address
Handson automatically sets the DMX address when adding fxtures to the patch, by fnding the frst
available DMX channel in your confguration. However, if you want to change the address, select 1 or
multiple fxtures and click ADDRESS. Enter the new address and click OK.
If you had multiple fxtures selected, Handson
will set the entered address for the frst selected
fxture and will automatically have the next
selected fxtures follow the previous ones. For
example, if you select 4 8-channel dimmers in
the patch, click ADDRESS and enter “101”. This
will result in addresses 101, 109, 117 and 125 for
the selected dimmers.
Properties
Selecting a fxture and clicking on the PROPERTIES button will pop up the Fixture Properties window.
This window allows you to enable INVERT PAN,
INVERT TILT and SWAP PAN TILT in case the
fxture is a moving light.
If the fxture has RGB colour mixing but no DMX
channel for intensity, you can enable VIRTUAL
DIMMER. This option will give the fxture
dimmer capability separate from the RGB
control.
p 10