Clay Paky HandsOn - Manual (Page 19)

Handson Manual
Condition
The condition specifes when the cue will be triggered. There are 3 possible Conditions:
Halt The cue will be triggered when you press the GO button.
Follow The cue will be triggered as soon as the previous cue has fnished fading.
Wait The cue will be triggered autocratically after the previous cue has been triggered.
Cue Timing
To explain the diferent timings in combination with the Cue Condition, see the following diagram:
Delay
The delay time (in seconds) is the time between the cue being triggered, and the cue actually starting to
fade.
Fade In
The Fade In time (in seconds) is the fade time for all dimmers fading in (dimmer values going UP) in the
cue and all other fading attributes (e.g. colour mix, position).
Fade Out
The Fade Out time (in seconds) is the fade time for all dimmers fading out (dimmer values going DOWN)
in the cue.
Click and drag to select multiple properties for multiple cues, e.g. fade in for multiple cues or delay &
fade in for multiple cues
p 18