Boss Audio Systems SP-505 - Manual (Page 70)

70
Chapter 11. Using a memory card
5. Press [F3] (FILE).
The names of the WAV and AIFF files saved on the card
will be displayed.
If no WAV or AIFF files have been saved, the display
will indicate “******”.
* File names longer than eight characters and file names in
Japanese will not be displayed correctly.
fig.11-06a
6. Use the VALUE dial to select the file that you want to
load.
7. Press CURSOR [ ↓ ], and use the VALUE dial to select
the pad to which the file you want to load is to be
assigned.
8. Press [F1] (EXECUTE) to load the file.
To cancel, press [F2] (CANCEL).
9. Press [SONG] or [PTN] to return to the Play screen.
Never turn off the power while the display indicates
“Keep Power On!”
Precautions concerning the
loading of WAV/AIFF files
● The filename extension must be wav for WAV files, and
aif for AIFF files. The file cannot be recognized with any
other extension.
● Only files with 8 or 16 bit quantization are supported.
● Sample rate conversion is not performed. The data will
be loaded as if its sampling rate were 44.1 kHz. If you
load a file with a sample rate of anything other than 44.1
kHz, the playback pitch will be incorrect.
● The loop point settings within an AIFF file will be
ignored.
● If you attempt to load a WAV/AIFF file in a format that
the SP-505 does not support, an error message of
“Unsupported Format!” will appear, and it will not be
possible to load the file.
● Compressed WAV files or AIFF files cannot be loaded.
● Extremely short waveform data (less than approximately
70 ms) cannot be loaded.
Deleting a WAV/AIFF file
1. Press [SONG] or [PTN] to display the Play screen.
2. Press [SYSTEM] to display the System screen.
fig.10-01a
* It is not possible to display the System screen while a pattern
or song is playing.
3. Press [F3] (CARD).
* If a memory card is not inserted, “CARD” will not appear above [F3].
4. Press [F2] (LOAD).
* If the memory card has been formatted in a format that cannot
be read by the SP-505, “LOAD” will not appear above [F2].
Please format the card. (p. 66)
5. Press [F3] (FILE).
The names of the WAV and AIFF files saved on the card
will be displayed. If no WAV or AIFF files have been
saved, the display will indicate “******”.
fig.11-06a
6. Use the VALUE dial to select the file that you want to delete.
7. Press [F3] (DELETE).
You will be asked to confirm that you really want to
delete the file.
fig.11-08
8. To delete the file, press [F1] (YES).
To cancel, press [F2] (NO).
9. Press [SONG] or [PTN] to return to the Play screen.
Never turn off the power while the display indicates
“Keep Power On!”