Clay Paky SUPERSHARPY (C61390 ) - Manual (Page 12)

12 SUPERSHARPY
COLOR
CMY short-cut
It lets you optimise (ON) the color change time of the color wheel since the disk rotates in the direction that
requires the shortest and thus quickest movement. Select OFF to turn off or disable this option.
Linear Movement
It lets you enable (ON) the linear color wheel movement. Select OFF to turn off or disable this option.
SHUTTER
Shutter on error
It lets you activate (ON) automatic "Stopper/Strobe" closing in the event of Pan/Tilt positioning error. Select
OFF to turn off or disable this option.
Dimmer on Shutter
Select ON to enable automatic Dimmer closing when the Strobe is fully closed. Select OFF to turn off or
disable this option.
DIMMER FILTER TYPE
It lets you best optimise the "Dimmer curve" according to that set on the control panel. One of the following 2
options can be selected:
DMX follower
Dimmer movement speed/linearity follows the DMX values set by the panel.
Position dependent
Dimmer movement speed follows the DMX values set by the panel taking into account the physical Dimmer
starting position.
DISPLAY
It lets you activate (ON) display brightness reduction after about 30 seconds in idle status. Select OFF to turn
off or disable this option.
SAFETY BEAM
It lets you turn ON a light beam temperature reduction when Focus movement is 50% over its stroke, if no
CMY colour wheels are inserted, Frost is automatically inserted on the Cyan wheel.