Clay Paky SUPERSHARPY (C61390 ) - Manual (Page 24)

24 SUPERSHARPY
3
2
1
18
Static gobo wheel removal - Fig. 18
19
WARNING:
• Before switch off the fixture, is necessary to keep closed the dimmer channel for at least 5 seconds, this is to ensure a better working
/ reliability of the lamp itself (it is recommended to turn off the lamp when it is dimmed).
• The projector needs to be positioned so that the objects hit by the beam of light are at least 18 metres (59’1”) from the lens of the projector.
A “Soft filter” is available on the Supersharpy (Channel 4 - Colour1 - DMX bit=50) when this ''Soft Filter'' is into the beam, the projector
can be used at a minimum distance of 12 metres from illuminated objects.