Brother NC-4100H User Manual
Page 77
CHAPTER 6 NOVELL NETWARE PRINTING
6-10
Configuring the Brother Print Server
(Remote Server Mode in NDS mode)
using Novell NWAdmin and BRAdmin
To configure a Brother print server for remote printer mode with NWADMIN
(NetWare Administrator utility) and BRAdmin, you will need to perform the
following steps:
1.
Make sure that the PSERVER NLM (NetWare Loadable Module) is loaded
on your file server and that you are logged in as ADMIN in NDS mode on
the NetWare 4.1x file server.
2.
Start NWADMIN by double clicking on the icon. Select the desired Context
that will contain the new printer.
3.
Select Object from the menu bar and then Create. When you get the New
Object menu, select Printer and then OK.
4.
Enter the name of the printer and select Create.
5.
Double click on the print server name of your PSERVER NLM. Click on
Assignments and then Add.
6.
If necessary, change the directory context. Select the printer you created and
click OK. Note the number of the printer, as you will use this later, then
click OK.
7.
Select the desired Context that will contain the default print queue, and then
click on Object and Create to get New Object menu.
8.
Select Print Queue and then OK. Make sure that Directory Service Queue is
selected, and then type in a name for the default print queue.