Brother NC-4100H - Manual (Page 116)

CHAPTER 10 BANYAN VINES NETWORK CONFIGURATION
10-4
File Server Queue Configuration
You must now configure the queue(s) on the Banyan VINES file servers. Print
queues are one of several different types of services that are available on a VINES
file server. To configure a print queue, use the MANAGE utility as follows:
1. From the main menu, select 1 - Services and press ENTER.
2. You will get the Manage Services menu. Select ADD a server-based service
and press ENTER.
3. From the Add A Service screen type the desired StreetTalk name for the
print queue, press ENTER, and then type in a description of the print server
followed by ENTER.
4. Select the desired file server (if there is more than one) and press ENTER.
5. When you get the Select Type Of Service screen, select 3 - VINES print
service (for VINES 5.xx) or 2 - Banyan Print Service (for VINES 6.xx) and
press ENTER.
6. Use the arrow keys to select the disk where the print queue service will
reside and press ENTER. You will get the message "The service is running
but not yet available to users." Press F10.
7. If desired, type in the maximum number of jobs and maximum size of job
for the queue when you get the Configure Queue screen. Otherwise press
F10 for unlimited number and size.
8. If desired, choose a default paper format when you get the Configure Paper
Formats screen. Otherwise, press F10 to select the defaults.
9. If desired, enter the user names that are authorized to use the printer when
you get the Access Lists screen. Otherwise, press F10 to accept the defaults.
10. If you have a VINES 5.xx system, you may optionally enter the users to be
notified in the event off printer problems when you get the Alert list screen.
Otherwise, press F10 to accept the defaults (not applicable for VINES 6.xx).
11. When you get the Add A Destination screen, use the arrow keys to select
PCPrint and press ENTER.
If the PCPrint option is not installed, PCPrint will not appear on this screen. You
must have PCPrint installed in order to use an Brother print server.
12. When you get the Destination Attributes screen, enter the StreetTalk name
of the Brother print server and an optional description. Press F10.