Novell netware troubleshooting, Novell netware troubleshooting 13-15 – Brother NC-4100H User Manual
Page 151
Advertising
CHAPTER 13 TROUBLESHOOTING
13-15
Novell NetWare Troubleshooting
If you cannot print from NetWare and you have checked the hardware and network
as described in the previous steps, first verify that the Brother print server is attached
to the server queue by going to PCONSOLE, selecting PRINT QUEUE
INFORMATION, and then CURRENTLY ATTACHED SERVERS. If the print
server does not appear in the list of attached servers, then check the following:
It is always a good idea to try followings in order to eliminate the possibility of setup
errors
•
Turning off the printer and then on again to force to rescan the Netware queue.
•
Deleting and recreating the print server and creating a new print queue in order
to eliminate the possibility of setup errors.
Advertising