DJI Naza-M - Manual (Page 17)

©2013 DJI Innovations. All Rights Reserved. 17 |
A
2
Low-Voltage Alert
In order to prevent your multi-rotor from a crash or other harmful consequences caused by low battery voltage,
there are two levels of low voltage protection available to use. You can choose to use or not to use them; however
we strongly recommend using the protections if available! Low-Voltage Alert is to indicate that the battery cannot
provide enough power for the aircraft, in order to warn you to land the aircraft ASAP. You can configure this
function in the assistant software, and please read the text in the software carefully before your flight. Make sure to
carry out the Current Voltage Calibration.
There are both first level and second level protections. The first level protection has LED warning. During second
level protection the aircraft will land automatically with LED warning. Meanwhile the center point of throttle stick
will move up slowly to 90% of endpoint, you should land ASAP to prevent your aircraft from crashing!
It is not for fun, you should land your aircraft ASAP to prevent your aircraft from crashing or other harmful
consequences!!!
(1) Configure the FailSafe function in the assistant software -> “Advanced” -> “F/S” and read the
instruction thoroughly and carefully.
(2) Configure the Low-Voltage Alert function in the assistant software -> “Advanced” -> “Voltage”
and read the instruction thoroughly and carefully.