Metrohm 940 Professional IC Vario ONE/SeS/Prep 2 User Manual
940 professional ic vario
Advertising
Table of contents
Document Outline
- Table of contents
- Table of figures
- 1 About these Short Instructions
- 2 Introduction
- 3 Overview of the instrument
- 4 Installation
- 4.1 Setting up the instrument
- 4.2 Removing the handle
- 4.3 Removing transport locking screws
- 4.4 Connecting the drainage tubing and leak sensor
- 4.5 Column thermostat
- 4.6 Connecting the eluent bottle
- 4.7 Connecting the eluent degasser
- 4.8 Installing the high-pressure pump
- 4.9 Installing an inline filter
- 4.10 Installing the pulsation absorber
- 4.11 Injection valve
- 4.12 Suppressor
- 4.13 Metrohm CO2 Suppressor (MCS)
- 4.14 Installing the detector
- 4.15 Connecting the sample degasser (optional)
- 4.16 Peristaltic pump
- 4.17 Installing the 6-port valve
- 4.18 Connecting the instrument to a computer
- 4.19 Connecting the instrument to the power supply
- 4.20 Initial start-up
- 4.21 Connecting and rinsing the guard column
- 4.22 Connecting the separation column
- 4.23 Conditioning
- 5 Operation
- 6 Warranty (guarantee)
- 7 Accessories
- Index