Metrohm 838 Advanced Sample Processor Installation Instructions User Manual
838 advanced sample processor, Installation instructions
Advertising
Table of contents
Document Outline
- Title
- Table of contents
- Tables
- List of illustrations
- 1 Introduction
- 2 Safety notes
- 3 Installation
- 3.1 Installation flowchart
- 3.2 Instrument setup
- 3.3 Fitting the accessories
- 3.3.1 Connecting the keypad
- 3.3.2 Connecting the Swing Head
- 3.3.3 Fitting the retention plate
- 3.3.4 Fitting the needle or tubing
- 3.3.5 Fitting the filtration cell holder or Dosino holder
- 3.3.6 Fitting the ultrafiltration cell
- 3.3.7 Fitting the dialysis cell
- 3.3.8 Fitting the Dosino
- 3.3.9 Tubing connections
- 3.3.10 Pump tubings
- 3.3.11 Connection of the ultrafiltration cell
- Connecting the dialysis cell
- 3.3.13 Inserting capillaries or tubings
- 3.3.14 Fitting the stand bracket
- 3.3.15 Connecting pumps
- 3.3.16 Connector dosing drives and stirrers
- 3.3.17 Installing the catch pan
- 3.3.18 Sample racks
- 3.3.19 Fitting the safety guard/splash guard
- 3.4 Connecting external instruments
- 3.5 Connection to Metrohm IC systems
- 3.5.1 IC system remotely controlled by PC
- 3.5.2 Metrohm IC systems
- 3.5.3 MIC-2 modular anionic system with chemical suppression
- 3.5.4 MIC-2 modular anionic system with chemical suppression and sample dilution
- 3.5.5 Capillary connections for sample dilutions
- 3.5.6 Equipping the work head of the mixing container
- 3.5.7 MIC-2 modular anionic system with chemical suppression and ultrafiltration of the samples
- 3.5.8 MIC-3 modular anionic and cationic system with chemical suppression
- 3.5.9 MIC-7 anionic system with chemical suppression and dialysis
- 3.5.10 MIC-8 modular system with 817 Bioscan for the sugar analysis
- 3.5.11 Connection to 761 Compact IC or 790 Personal IC
- 3.6 Connection to Metrohm VA systems
- 3.7 Sample racks
- 4 Service, maintenance, faults
- 5 GLP validation – diagnosis
- 6 Annex
- 6.1 Filtration
- 6.2 Technical data
- 6.2.1 2 Channel peristaltic pump
- 6.2.2 Pump connections
- 6.2.3 Injection valve
- 6.2.4 Keypad with LCD display
- 6.2.5 Interfaces
- 6.2.6 MSB connections
- 6.2.7 Swing Head connection
- 6.2.8 Lift
- 6.2.9 Turntable
- 6.2.10 Stirrer connection (DIN socket)
- 6.2.11 Mains connection
- 6.2.12 Safety specification
- 6.2.13 Electromagnetic compatibility (EMC)
- 6.2.14 Ambient temperature
- 6.2.15 Dimensions and material
- 6.3 Standard equipment
- 6.4 Warranty
- 6.5 Declaration of Conformity
- 7 Index