Belkin G+ MIMO F5D9231-4 - Manual (Page 14)

12
G+ MIMO Wireless Router
sections table of contents 1 2 3 5 6 7 8 9 10 4
COnneCTInG and COnfIGURInG yOUR ROUTeR
step 1: Hardware Connections – follow the Quick Installation Guide (QIG)
a� Unplug your modem’s power cord� Put the Router next to the
modem� Raise the Router’s antennas�
b� Locate the networking cable that connects your modem and
computer� Unplug that cable from your modem, and plug it into any
gray port on the back of the Router�
C� Find your new networking cable (included in the box with your
Router) and connect it to the yellow port on the back of the Router�
Connect the other end to your modem, in the port that’s now free�
d� Plug in your modem’s power cord� Wait 60 seconds for the modem
to start up� Plug the Router’s power supply into the black port on
the back� Plug the other end into the wall outlet�
e� Wait 20 seconds for the
Router to start up� Look
at the display on the front
of the Router� Make sure
the “Wired” and “Router”
icons are lit up in green� If
they are not, recheck your
connections�
LAN
WAN
B
D D
A
D
C
C
A