Belkin G+ MIMO F5D9231-4 - Manual (Page 31)

29
G+ MIMO Wireless Router
sections table of contents 1 2 3 4 6 7 8 9 10 5
alTeRnaTe seTUP MeTHOd
1� User name
This space is provided to type in your user name that was assigned by
your ISP�
2� Password
Type in your password and retype it into the “Retype Password” box to
confirm it�
3� Get IP by dHCP
If your ISP provided you with a specific IP address, uncheck this box
and enter your IP address, subnet mask, and default gateway in the
fields that appear�
4� service name
A service name is rarely required by an ISP� If you are not sure if your
ISP requires a service name, leave this blank�
5� MTU
The MTU setting should never be changed unless your ISP gives you
a specific MTU setting� Making changes to the MTU setting can cause
problems with your Internet connection including disconnection from the
Internet, slow Internet access, and problems with Internet applications
working properly�
6� disconnect after X���
The “Disconnect” feature is used to automatically disconnect the Router
from your ISP when there is no activity for a specified period of time� For
instance, placing a check mark next to this option and entering “5” into
the minute field will cause the Router to disconnect from the Internet
after five minutes of no Internet activity� This option should be used if
you pay for your Internet service by the minute�