Belkin G+ MIMO F5D9231-4 - Manual (Page 89)

87
G+ MIMO Wireless Router
sections table of contents 1 2 3 4 5 6 7 8 10 9
TROUblesHOOTInG
Problem:
I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin client card�
6� Ensure that the check box “The key is provided for me
automatically” at the bottom is unchecked� If you are using this
computer to connect to a corporate network, please consult your
network administrator if this box needs to be checked�
7� Type your WEP key in the “Network key” box�
Important: A WEP key is a mixture of numbers and letters from A-F and
0-9� For 128-bit WEP, you need to enter 26 keys� This network key needs
to match the key you assign to your Router�
For example:
C3 03 0f af 4b b2 C3 d4 4b C3 d4 e7 e4 = 128-bit key
8�
Click “OK”, and then “Apply” to save the settings�
If you are not using a Belkin wireless client card, please consult the
manufacturer’s user manual for that wireless client card�
solution:
The client card must use the same key as the Router� For instance, if your Router uses the key 00112233445566778899AABBCC, then the client card
must be set to the exact same key�
1� Double-click the Signal Indicator icon to bring up the “Wireless
Network” screen�
2� The “Advanced” button will allow you to view and configure more
options of your card�
3� Once the “Advanced” button is clicked, the Belkin Wireless LAN
Utility will appear� This Utility will allow you to manage all the
advanced features of the Belkin Wireless Card�
4� Under the “Wireless Network Properties” tab, select a network
name from the “Available Networks” list and click the “Properties”
button�
5� Under “Data Encryption”, select “WEP”�