Banner PresencePLUS PPM8 LCD Color Monitor User Manual
Page 7
To rapidly verify that vials are filled to the correct level and that caps are
correctly aligned, a high-speed PresencePLUS P4 EDGE vision sensor
locates the vial and verifies the fill level and cap placement.
Each unit of pastry dough is inspected by a PresencePLUS
P4 AREA vision sensor to detect the presence of a frosting
packet—ensuring that one is included in each package.
Following installation of a rivet into each corner of an
automobile steering wheel horn frame assembly, the
component passes beneath a PresencePLUS Pro vision
sensor to verify the presence and quality of each rivet.
A high-resolution PresencePLUS P4 EDGE 1.3 vision sensor combines with
a laser line to inspect the beveled gum wedge of continuously extruded
rubber. The laser line bends at the bevel, allowing a cost-effective two-
dimensional vision sensor to perform a three-dimensional measurement.
To verify the quantity, pitch and straightness of connector
pins on a stamped metal subassembly, the high-resolution
PresencePLUS P4 OMNI 1.3 vision sensor counts the number of
connector pins, simultaneously detecting irregular gaps that
indicate pins are bent or missing.
Add inspection capabilities where you need them.
PresencePLUS® Pro and P4
vision sensors integrate easily into existing production systems to provide new
levels of quality control, error proofing and verification.