Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 2)

Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
page 2
Introducing PresencePLUS Pro
PresencePLUS Pro is an easy-to-use camera system with
advanced visual inspection capabilities. With limited knowledge
of vision systems, a user can quickly and accurately set up
PresencePLUS Pro for an inspection that evaluates product on a
production line.
Inspection parameters are set up using a remote personal
computer (PC). A digital camera captures images and the sensor
software analyzes those images, using one or more vision tools,
to pass or fail the product. The PC is not required for running
inspections after the inspection files have been stored in the
controller’s memory.
Start
Hook Up the Hardware
Install the Software and
Establish Communications
Acquire an Image of the Part
Being Inspected
Choose Vision Tools to
Find the Flaw or Feature
Add a Test Tool To Set Up
Pass/Fail Criteria
Teach Good Examples
Run
Finish
Quick Start Overview
This guide is designed to
provide – even to those new
to vision sensing – the
information needed to use
this system. It provides an
overview of the sensor and
illustrates how to easily set
up the PresencePLUS Pro to
inspect a product. The flow
chart at right provides an
overview for the system
setup.
TIPS TIPS
For more detailed
instructions, both
the Installation
Manual and the
Operator’s Guide
are on the
PresencePLUS Pro
installation CD.
68369 (ppp quickstart guide) 5/7/02 11:50 AM Page 2