Banner PPSIM Sensor Interface Modules - Manual (Page 3)

P/N 126330

Models PPSIM.. Sensor Interface Modules
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Specifications
Dimensions
Input Supply Voltage 10 - 30V dc (See PresencePLUS P4 specifications for sensor data)
Adjustments External Trigger push button
Remote TEACH push button
Indicator LEDs NPN Models PNP Models
Power
Green: Power ON Red: Wrong polarity
External Trigger
Green: Active
Remote TEACH
Green: Active
I/O 1 through I/O 4
Green: Conducting
Power
Green: Power ON Red: Wrong polarity
External Trigger
Red: Active
Remote TEACH
Red: Active
I/O 1 through I/O 4
Red: Conducting
Construction PCB circuit board; plastic housing, end caps, and DIN rail mounting hardware
Environmental Rating IEC IP00: NEMA 1
Connections Terminal Strip: Accepts 12 to 24 gauge wire
RS-: DB-9 female
PresencePLUS P4 Sensor (not included): DB-15 female, for SIM cordset (see Cables on page 4)
Operating Conditions Temperature: 0° to +50° C (+32° to +122° F)
Max. Relative Humidity: 90% (non-condensing)
Weight Approximately 135 grams (0.3 lb.)
2X 2.7 mm
(0.11")
127.5 mm (5.02")
2X 11.8 mm
(0.46")
2X R 2.7 mm
(R 0.11")
43.2 mm
(1.70")
137.6 mm
(5.42")
103.7 mm
(4.08")
5
9 6
1
86.4 mm
(3.40")
29.5 mm
(1.16")
49.5 mm
(1.95")
17.5 mm
(0.69")