Wiring table dimensions – Banner PresencePLUS Lighting User Manual

Page 2

Advertising
background image

LED..I150-3.. 3-Tier Low-Angle Ring Light (150 mm)

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]

P/N 127582

rev. A

WARRANTY:

Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace,

free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty
does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or
implied.

LED..I150-3W

Wire

PresencePLUS Pro

Controller Terminal Block

External Power Supply

(Strobed)

External Power Supply

(Continuous)

Brown

Pin 1, +V (24V dc ±10%)

+V

+V

Blue

Pin 2, -V (dc common)

-V

-V

Black

Pin 4 (strobe)

+5V dc OFF
-V ON

-V

Wiring Table

Dimensions

¼ - 20 threaded hole (x8)

Allow max. screw length 0.875" inside housing

192.5 mm (7.58")

127.0 mm (5.0")

127.0 mm

(5.0")

127.0 mm

(5.0")

32.7 mm

(1.28")

32.7 mm

(1.28")

32.7 mm

(1.28")

192.5 mm

(7.58")

Ø 127.0 mm

(Ø 5.0" )

96.2 mm

(3.79")

96.2 mm (3.79")

25.8 mm (1.02")

13.1 mm (0.52")

Advertising
This manual is related to the following products: